For the first time holding a handsaw often unaware of how to hold the saw in the correct position so that the process of division or cutting wood goes well and easily. Because if we use a chainsaw is right in the proper position will show that not only a carpenter who could do well and quickly.
The main principle of using a hand saw is that we must know the type of chain saw in accordance with the direction of wood fibers.
cutting Wood
The best types of saws are saws cut with a saw blade upright. This position is adjusted to the fiber direction. The upright saw blade for cutting fiber is stronger and will feel lighter at the time of cutting.
Place the workpiece on a stable medium, it is better if the width is limited by the side of the barrier which is not easy to move. In the secant of the desired size put your thumb nail tip directly adjacent to the saw.
Always move the saw to the rear to create a groove saws. For best results you should use a power boost to cut the wood fibers. araha pure backwards just to take its original position.
splitting Wood
In this technique are lighter than wood cut for the main process is to separate the bonding wood pores. More oblique blade-shaped with a certain angle.
For the stability of the cleavage of the workpiece should be tied with a 'clamp' to the desk or workbench. The position of the thumb nail with the wood cutting process.
Angle the saw.
Using the most ideal cut saws are at an angle of 45 degrees and the saw apart at a position 60 degrees for best results.
No comments:
Post a Comment