How to Install the Wall Mount Fiscer

Wall mounting bracket fan using the Fischer (or Fisher) on a concrete wall. By using the Fischer, brackets are locked with screws so it will be easily removable plugwhen compared with the nail.

By using the Fischer also can prevent cracks in the walls due to vibrations in the wallis smaller than using nails.

Because the Fischer function is to support the weight on the wall, make sure youchoose the size and shape corresponding to the load that will be retained by fischer, please consult with an expert for a heavy burden.

Equipment needed:
- Electric Drill
- Eyes Special Drill concrete (select the appropriate diameter to the size of Fischer)
- Fischer (or Fisher)
- Screws
- Screwdriver
- Hammer and nails
- Markers




workmanship:


1. Determining Point Drilling
Use the holes in the bracket that would be installed as a mall to make drilling points, marked with a marker. So that drilling is not off the mark, make the initial hole with the tip of a nail, use a hammer to hit a nail to make this initial hole.



2. doing Drilling
Perform drilling at points that have been given a hole early, drilling depth accordingto the length of Fischer.


3. installation Fischer
Fischer enter one by one, use a hammer to help.


4. mounting Bracket
Fit the bracket on the fischer, then lock the screws. Use a screwdriver to tighten thescrews. Once installed, test the strength retaining bracket before given a realburden.